Eaton PDI WaveStar BCMS, Инструкция по установке и эксплуатации, Страница: 29 / 54

Eaton PDI WaveStar BCMS Hub Installation and Operation Manual P-164001108—Rev 01 21
C Chhaapptteerr 44 S Syysstteem m S Seettuupp
44..11 A Addm miinniissttrraattiivvee S Seettuupp
44..11..11 LLooggggiinngg IInn//LLooggggiinngg O Ouutt
Anyone can view the different display screens without logging in, but a user with an appropriate access level
must log in to use controls or make changes to other parameters.
Figure 14. Logging In and Out from Home Screen
44..11..22 A Acccceessss LLeevveell
BCMS Hub security is based on the identification of each user by a PIN with an associated password. The PIN
identifies the user and the password allows access. The
user name associated with the PIN is displayed on the
Home page when a user logs in. This scheme provides a login history and accurate forensics if there is problem
with the BCMS Hub.
The BCMS Hub has three access levels that require logging in:
1. Eaton: This level has authorization for all actions except clearing the Event Log. Eaton access is required to
use the Configuration screen.
2. Service: This access level is for Eaton-authorized service representatives. This level has authorization for
all actions except using the Configuration Screen and clearing the Event Log .
3. Administrator: This access level has authorization for all actions except using the Configuration Screen ,
which is not available to users. The Administrator is the only user who can clear the Event Log .
If you attempt to use a screen control without correct authorization, the BCMS Hub Voice Response Unit will
state, “You do not have access to this function.”