EATON
Installation & Maintenance Instructions
IMI+70-XP-XT Iss_A
© 2020, Eaton
Page 11
3.3.2
Washer Nozzle Installation
A continuous rotation pan and tilt unit, if supplied with an external washer unit, is supplied with a
washer nozzle and mounting bracket. If not already fitted, these should be fitted during installation
with the supplied fixings and positioned to allow the cleaning fluid to reach the camera window
when the wash command is sent. The supplied washer nozzle brackets are specific to housing type
and are delivered pre-aligned for effective use. (Fig. 11)
When a wash command is sent to the camera, the unit will move to a factory set position, allowing
the screen to be washed.
For non-continuous rotation pan and tilt units and fixed housings, the washer nozzle is installed on
the front window cover. (Fig. 12)
Fig.11 Housing washer nozzle
Fig.12 Non-continuous Rotation P&Ts and Fixed housings washer nozzle
