Eaton Network-M3, Руководство пользователя

Страница: 193 / 294

Resetting username and password
Servicing the Network Management Module – 193
•
•
•
1.
2.
3.
4.11 Resetting username and password
4.11.1 As an admin for other users
1. Navigate to Contextual help>>>Settings>>>Local users .
2. Press the pen icon to edit user information:
3. Change username and save the changes.
4. Select Reset password and choose from the following options :
Generate randomly
Enter manually
Force password to be changed on next login
5. Enter your own password to confirm the changes.
6. Save the changes.
4.11.2 Resetting its own password
1. Navigate to Contextual help>>>User profile .
2. Press Change password
3. Enter your current password, the new password twice.
4. Press Submit to save the changes.
4.12 Recovering main administrator password
To recover the main administrator password, ask another administrator to initialize the password.
If it is not possible, proceed to the card sanitization:
Access the Network Module, disconnect the Network cable, if needed.
Unscrew the Network Module and remove it from the slot.
Locate the SANITIZATION switch that is located either on the back or on the Network Module.
Below instruction will sanitize the card and blank all the data.
Depending on your network configuration, the Network Module may restart with a different IP address.
Only main administrator user will remain with default login and password.
Refresh the browser after the Network module reboot time to get access to the login page.