Eaton’s Crouse-Hinds Business
Cooper Crouse-Hinds Pte Ltd
No. 2 Serangoon North Ave 5 #06-01
Singapore 554911
tel: + 65 6645 9888
fax: +65 6297 4819
Page 12
Monitored segments are indicated with a tick mark, non-monitored are without tick mark:
In this example, segments 5 to 8 are not
monitored. The symbol of the non-monitored
segments will show the last status, or will be
reset to the green symbol
-scanning Segment Values to
for the respective segment. See
section 6.4.2.
5.1.5.
Symbols used in the DTM
?
A black question mark besides the parameter name indicates that the parameter
value is out-of-date.
Out of date means that the value is not updated yet; simply wait until the question
mark disappears which means that the value is updated.
The pencil symbol besides the parameter name indicates that the parameter value
was modified, or that it is a value from the DTM data set stored on your hard disk
which may be different from the values stored inside the F809F module.