Eaton Moeller SmartWire-Darwin EU5C-SWD-CAN, Аппаратное обеспечение и инженерия

Страница: 29 / 108

25
02/09 AWB2723-1612en
4 Programming
Introduction The SmartWire-Darwin gateway is integrated into the
PROFIBUS configurator of the programming system as a DP
slave. A device master file (GSD file) which contains a
standardized description of the SmartWire-Darwin gateway
is necessary for this. Depending on the PROFIBUS master
used two different versions are available for this:
• for Motorola-based CPUs (e.g. for Siemens S7):
Moel4d13.gsd with the relevant illustrations
KM4D12_N.bmp and KM4D12_D.bmp
• for Intel-based CPUs (e.g. for Moeller XC100/200, PS4):
Moe4d13.gsd with the relevant illustrations
KM4D12_N.bmp and KM4D12_D.bmp
h
As of version V.2.3.9 and service pack ecp_update_0109
these files are included in the Moeller programming
system easySoft-CoDeSys.
Otherwise you can find the current version of the GSD files
on our web site at
www.moeller.net in the Support
section. In this case load the relevant GSD files with the
relevant bitmap files into the relevant directory of your
programming system. Please refer to the documentation
for your programming system for information on this.
For the Moeller programming system easySoft-CoDeSys
this folder is in:
C:\Programme\Gemeinsame Dateien\
CAA-Targets\<Version>\PLCConf<Version>
The installed version for this is, for example,
Moeller V2.3.9.