Installation
Menvier40/100
Page 16
Figure 22 Insert Tabs
Figure 23. Push Home Clips
Figure 24 Fit Securing Screw
When the PCB is in place, connect the wires from
the transformer to the 20Vac connector on the
PCB (11 in Figure 3).
Installing the Lid/Back Tamper
Figure 25 Lid/Back Tamper
Fit combined lid/back tamper bracket and switch
(provided). Ensure that the switch is oriented as
shown in Figure 25.
Connect the lead from the switch to the back
tamper connector on the PCB (see 2 in Figure 3).
Note that to be approved at Security Grade 3 you
must fit the lid/back tamper.
