Eaton M-Max series, Руководство по эксплуатации

Страница: 191 / 199

04/10 MN04020001Z-EN
List of parameters
187
P11.5 605 - rw U/f characteristic curve,
mean
voltage value 0.00 - P11.3 % 113 100.00
P11.6 606 - rw Output voltage at zero
frequency 0.00 - 40.00 % 113 0.00
P11.7 109 - rw Torque increase 0 = Deactivated
1 = active 113 0
P11.8 600 - rw Control mode 0 = Frequency control (U/f)
1 = Speed control with
slip compensation 113 0
P11.9 601 - rw Pulse frequency 1.5 - 16.0 kHz 115 6.0
P11.10 522 - rw Stabilize pulse frequency,
(sinusoidal filter) 0 = Deactivated
1 = activated^ 115 0
Braking
P12.1 507 - rw DC braking, current 0.2 x I
e
- 2 x I
e
116 I
e
P12.2 516 - rw DC braking, braking time at
start 0.00 - 600.00 s 116 0.00
P12.3 515 - rw DC braking,
start frequency during
delay ramp 0.00 - 10.00 Hz 117 1.50
P12.4 508 - rw DC braking, braking time in
case of STOP 0.00 - 600.00 s 118 0.00
P12.5 504 - rw Brake chopper (only active and visible with braking
transistor installed)
0 = Deactivated
1 = Automatic activation in operation
(RUN)
2 = Automatic activation in operation
(RUN) and upon stop (STOP) 119 0
P12.6 1447 - rw Brake chopper,
switching threshold (only active and visible with braking
transistor installed)
0 - 870 V 119 0
P12.7 1448 - rw Open external brake,
deceleration time 0.00 - 320.00 s 120 0.20
P12.8 1449 - rw Open external brake,
frequency limit value 0.00 - P6.4 Hz 120 1.50
P12.9 1450 - rw Close external brake,
frequency limit value 0.00 - P6.4 Hz 120 1.00
P12.10 1451 - rw Close external brake,
frequency limit value on
reversing (REV) 0.00 - P6.4 Hz 120 1.50
P12.11 1452 - rw Open external brake,
current limit value 0.00 – P7.2 A 120 0.00
PNU ID Access right Designation Value range Page FS
(P1.3) User
setting
RUN ro/rw