Eaton IQ 150S, Руководство пользователя и инструкция по установке

Страница: 135 / 234

IM02601006E www.eaton.com 7-5
IQ 150S/250S 7: Using the Submeter
2. Press the
Enter
button from the Main Menu to view the Parameters screen for the mode that is
currently active.
7.2.3: Using Reset Mode
Reset mode has two options:
• Reset: Demand (rStd): resets the Max and Min values.
• Reset: Energy (rStE): resets the energy accumulator fields.
1. Press the Enter button while either rStd or
rStE is in the A window. The Reset Demand
No or Reset Energy No screen appears.
• If you press the
Enter
button again, the
Main Menu appears, with the next mode in
the A window. (The
Down
button does not
affect this screen.)
• If you press the
Right
button, the Reset
Demand YES or Reset Energy YES screen
appears. Press
Enter
to perform a reset.
NOTE:
If Password protection is enabled for
reset, you must enter the four digit password
before you can reset the meter (see Chapter 5 for
information on Password protection). To enter a
password, follow the instructions in Section 7.2.4.
CAUTION!
Reset Demand YES resets
all
Max and Min values.
2. Once you have performed a reset, the screen displays either “rSt dMd donE” or
“rSt EnEr donE”and then resumes auto-scrolling parameters.
A
B
C
-
-
-
MENU ENTER
A
B
C
-
-
-
MENU ENTER
A
B
C
-
-
-
MENU ENTER
A
B
C
-
-
-
MENU ENTER