Page ii
©
Eaton’s 2016
The information, rec
ommendations, descriptions and safety notations in this document are based on Eaton Corporation’s (“Eaton”)
experience and judgment and may not cover all contingencies. If further information is required, an Eaton sales office should be
consulted. Sale of the product shown in this literature is subject to the terms and conditions outlined in appropriate Eaton selling policies
or other contractual agreement between Eaton and the purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY
EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH CONTRACT STATES THE ENTIRE OBLIGATION OF EATON. THE
CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT BETWEEN THE PARTIES.
In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or other-wise for
any special, indirect, incidental or consequential damage or loss whatsoever, including but not limited to damage or loss of use of
equipment, plant or power system, cost of capital, loss of power, additional expenses in the use of existing power facilities , or claims
against the purchaser or user by its customers resulting from the use of the information, recommendations and descriptions contained
herein. The information contained in this manual is subject to change without notice.
About this Guide
This guide is a document for people who need to install or configure an i-on "Next
Generation" intrusion system. The guide provides:
Information about the capabilities of the i-on control units.
Installation advice.
Detailed information about options in the Installer menu.
Detailed connection information is provided in the installation instructions provided with
each device.
Other Publications
The following additional publications are available:
i-on Administrator's Guide
- Provides detailed information about how to set and
unset the system, manage alarms, omit zones, set up users, test the system and
carry out other administration tasks.
i-on Quick User Guide
- Provides an overview of how to set and unset the system
for end users.
i-on Web Browser Interface Setup Guide
- Explains how to configure the system
using the web interface.
SMS Command Messaging User's Guide
- Describes how end users can control
the system using SMS text commands (e.g. to set or unset the system).
Separate installation instructions for each hardware device (e.g. control unit and
keypads).