Eaton HCU2 Скачать руководство пользователя страница 4

Страница: 4 / 48

Instruction Booklet

IB156002EN

Effective January 2022

Eaton HCU2/HCUn active harmonic

filter installation manual

EATON

www.eaton.com

Safety precautions

Installation, wiring, testing, and service must be performed in

accordance with all local and national electrical codes.

WARNING

LOCKOUT/TAGOUT ALL ELECTRICAL SOURCE CIRCUITS FEEDING THE

UNIT(S) IN THE OPEN POSITION BEFORE BEGINNING WIRING OR

TERMINATIONS. FAILURE TO FOLLOW THE INSTRUCTIONS COULD

RESULT IN SEVERE BODILY INJURY OR DEATH. ONLY QUALIFIED

PERSONNEL FAMILIAR WITH THE OPERATION AND CONSTRUCTION OF

THIS EQUIPMENT SHOULD INSTALL, ADJUST, MODIFY, AND SERVICE

THIS EQUIPMENT.

WARNING

HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH.
• APPLY APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT (PPE) AND

FOLLOW SAFE ELECTRICAL WORK PRACTICES. SEE NFPA 70E IN THE

USA, CSA

Z462, OR APPLICABLE LOCAL STANDARDS

• THIS EQUIPMENT MUST BE INSTALLED AND SERVICED ONLY BY

QUALIFIED ELECTRICAL PERSONNEL

• DO NOT EXCEED THE DEVICE’S RATINGS FOR MAXIMUM LIMITS
• GROUND EQUIPMENT USING THE GROUND CONNECTING POINT

PROVIDED BEFORE TURNING ON ANY POWER SUPPLYING

THIS DEVICE

• TURN OFF ALL POWER SUPPLYING THIS DEVICE AND THE

EQUIPMENT IN WHICH IT IS INSTALLED BEFORE WORKING

ON THE DEVICE OR EQUIPMENT

• AFTER REMOVING POWER, WAIT FOR 15 MINUTES TO ALLOW THE

CAPACITORS TO DISCHARGE PRIOR TO OPENING THE DOORS OR

REMOVING COVERS

• ALWAYS USE A PROPERLY RATED VOLTAGE SENSING DEVICE TO

CONFIRM POWER IS OFF

• REPLACE ALL DEVICES, DOORS, AND COVERS BEFORE TURNING ON

POWER TO THIS EQUIPMENT

• CAREFULLY INSPECT THE INTERIOR FOR TOOLS LEFT BEHIND BEFORE

CLOSING AND SEALING THE DOOR FAILURE TO FOLLOW THESE

INSTRUCTIONS WILL RESULT IN DEATH OR SERIOUS INJURY

FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN DEATH OR

SERIOUS INJURY.

WARNING

POTENTIAL COMPROMISE OF SYSTEM AVAILABILITY, INTEGRITY,

AND CONFIDENTIALITY
• CHANGE DEFAULT PASSWORDS AT FIRST USE TO HELP PREVENT

UNAUTHORIZED ACCESS TO DEVICE SETTINGS AND INFORMATION

• DISABLE UNUSED PORTS/SERVICES AND DEFAULT ACCOUNTS,

WHERE POSSIBLE, TO MINIMIZE PATHWAYS FOR MALICIOUS

ATTACKS

• PLACE NETWORKED DEVICES BEHIND MULTIPLE LAYERS OF CYBER

DEFENSES (SUCH AS FIREWALLS, NETWORK SEGMENTATION, AND

NETWORK INTRUSION DETECTION AND PROTECTION)

• USE CYBER SECURITY BEST PRACTICES (FOR EXAMPLE,

LEAST PRIVILEGE, SEPARATION OF DUTIES) TO HELP PREVENT

UNAUTHORIZED EXPOSURE, LOSS, MODIFICATION OF DATA AND

LOGS, INTERRUPTION OF SERVICES, OR UNINTENDED OPERATION

• RESTRICT UNIT ACCESS TO AUTHORIZED PERSONNEL ONLY

Introduction

The product can be provided in either of two types, an Harmonic

Correction Unit (HCU2) or Neutral Harmonic Correction Unit (HCUn).

Both types are to be installed as described in this manual. These

products are both referred to as an active filter in this manual.

Harmonic correction unit

Harmonic Correction Units (HCU2) are static power electronic

products that employ digital logic and IGBT semiconductors to

synthesize a current waveform that is injected into the electrical

network to cancel harmonic currents caused by nonlinear loads.

HCU2 employ current transformers to measure the load current to

determine the content of harmonic current present. By injecting

the synthesized current, network harmonic currents are greatly

mitigated, thus reducing the heating effects of harmonic current

and reducing voltage distortion.
HCU2 also have the ability to correct for poor displacement power

factor (DPF) and for mains current balancing. DPF correction can

be provided for either leading (capacitive) or lagging (inductive)

loads that cause poor DPF. Mains current balancing is achieved by

measuring the negative sequence current present and injecting the

inverse negative sequence current to balance the current for the

upstream network.
Multiple enclosure styles are available. Chassis mount open chassis

designs can be installed in other types of enclosures such as motor

control centers (MCC).

Neutral harmonic correction unit

Neutral Harmonic Correction Units (HCUn) are static power

electronic products that employ digital logic and IGBT

semiconductors to synthesize a current waveform that is injected

into the electrical network to cancel harmonic currents caused by

nonlinear loads. HCUn employ current transformers (CT) to measure

the load current to determine the content of harmonic current

present. By injecting the synthesized current, network harmonic

currents are greatly mitigated, thus reducing the heating effects of

harmonic current and reducing voltage distortion.
HCUn also have the ability to correct for poor displacement power

factor (DPF) and for mains current balancing. DPF correction can

be provided for either leading (capacitive) or lagging (inductive)

loads that cause poor DPF. Mains current balancing is achieved by

measuring the negative sequence current present and injecting the

inverse negative sequence current to balance the current for the

upstream network.
NEMA

1 and IP00 enclosure styles are available. Chassis mount

open chassis designs can be installed in other types of enclosures

such as motor control centers (MCC).
Eaton’s HCUn can be powered by three-phase conductors to provide

corrective current for Line-to-Line connected loads or by three-phase

conductors and neutral to provide correction for Line-to-Line and

Line-to-Neutral connected loads. The amount of correction can be

selected to provide neutral current for up to three times the phase

current correction. The neutral wiring must be sized appropriately

based on the selected neutral current correction.

Содержание HCU2

















































Результаты поиска

Содержание HCU2

Отзывы:

Похожие инструкции для HCU2

Бренды по названию

Популярные бренды

Eaton HCU2, Руководство по установке

Результаты поиска

Содержание HCU2

Отзывы:

Похожие инструкции для HCU2

Бренды по названию

Популярные бренды