To set the Variable Retract Position, jog the crimper to
desired retract position. Then, note value in “
Position
” field,
which is shown for reference.
Jog the crimper to the desired retract position
A. Note value in “Position” field
B. Press “Retract” field
C. Type desired value, hit ENT
The crimper will now retract to the desired position.
Note: The retract position can be safely entered as values 0 - 1000.
The retract position value is “global” and all crimps will
retract to this position until the value is changed.
Note: Entering a retract value that is smaller than the target setting
will cause the machine not to retract. The retract must then be
performed manually by using the switch.
Setting variable retract position
