Creating your first circuit diagram
For more information visit:
www.EatonElectrical.com
MN05013005E
95
Deleting the circuit diagram
X
Switch the EZD to STOP mode.
X
Use PROGRAM… to switch from the main menu to the next
menu level.
X
Select DELETE PROGRAM
The EZD will display the prompt DELETE?
X
Press
OK
to delete the program or
ESC
to cancel.
X
Press
ESC
to return to the Status display.
Fast circuit diagram entry
You can create a circuit diagram in several ways: The first
option is to enter the elements in the circuit and then to wire
all the elements together. The other option is to use the
enhanced operator guidance of the EZD and create the circuit
diagram in one go, from the first contact through to the last
coil.
If you use the first option, you will have to select some of the
elements in order to create and connect up your circuit
diagram.
The second, faster option is what you learned in the example.
In this case you create the entire rung from left to right.
J
EZD must be in STOP mode in order to extend, delete or
modify the circuit diagram.
PROGRAM...
DELETE PROGRAM
