Creating your first circuit diagram
For more information visit:
www.EatonElectrical.com
MN05013005E
89
From the first contact to the output coil
With EZD, you work from the input to the output. The first input
contact is
I 01
.
X
Press
OK
.
EZD proposes the first contact
I 01
at the cursor position.
I
flashes and can be changed, for example, to a
P
for a
pushbutton input using the cursor buttons
Í
or
Ú.
However,
nothing needs to be changed at this point.
X
Press
OK
2
×
, to move the cursor across the
01
to the
second contact field.
You could also move the cursor to the next contact field using
the
í
cursor button.
X
Press
OK
.
Again, EZD inserts a contact
I 01
at the cursor position.
Change the contact number to
I 02
, so that break contact S2
can be connected to input terminal I2.
X
Press
OK
so that the cursor jumps to the next position and
press cursor button
Í
or
Ú
to change the number to
02
.
X
Press
OK
to move the cursor to the third contact field.
You do not need a third relay contact, so you can now wire the
contacts directly up to the coil field.
I 01
L: 1 C:1 B:7944
I 01
Ê
L: 1 C:1 B:7944
I 01
I 02
L: 1 C:2 B:7944
J
You can press
DEL
to delete a contact at the cursor
position.
-I 02
Ê
L: 1 C:3 B:7944
