Creating your first circuit diagram
For more information visit:
www.EatonElectrical.com
MN05013005E
87
Starting point Status display
When you switch on EZD, it opens the Status display
immediately to show the switching state of the inputs and
outputs. It also indicates whether the EZD is already running
a program.
Note:
If another display is visible, a visualization
screen is shown.
X
Press
OK
to switch to the main menu.
Press
OK
to switch to the next menu level, and press
ESC
to
move one level back.
In this case EZD must be in STOP mode.
X
Press
OK
2
×
to enter the circuit diagram display via menu
items PROGRAM…
J
PROGRAM. This is where you will
create the circuit diagram.
I ............
I
P-
MO 02:00
Q........
STOP
J
The examples were written without the use of expansion
units. If an expansion unit is connected, the Status display
will first show the status of the basic unit and then the status
of the expansion unit before showing the first selection
menu.
PROGRAM...
STOP å RUN
PARAMETERS
SET CLOCK...
J
OK
has two other functions:
• Press
OK
to save modified settings.
• In the circuit diagram, you can also press
OK
to insert
and modify contacts and relay coils.
CIRCUIT DIAGRAM
FUNCTION RELAYS
