Setting date, time and daylight saving time
For more information visit:
www.EatonElectrical.com
MN05013005E
367
Setting date, time and
daylight saving time
The EZD devices are equipped with a real-time clock with
date and time functions. The “time switch” function block can
be used to implement time switch applications.
If the clock has not yet been set or if EZD is switched on after
the buffer time has elapsed, the clock starts with the setting
“WE 1:00 01.05.2002”. The EZD clock operates with date
and time so the hour, minute, day, month and year must all be
set.
X
Select SET CLOCK… from the main menu.
This will open the menu for setting the time.
X
Select SET CLOCK.
X
Set the values for day, time, month and year.
X
Press the
OK
button to access the Entry mode
–
ú í
Move between the parameters,
–
ÍÚ
Change the value,
–
OK
Save day and time,
–
ESC
Retain previous setting.
Press
ESC
to leave the time setting display.
J
The time, such as: 1:00, indicates the version of the device
operating system.
SET CLOCK
DST SETTING
HH:MM
00:27
DD.MM
05.05
YEAR :
2002
