Working with contacts and relays
For more information visit:
www.EatonElectrical.com
MN05013005E
139
Deleting contacts and coils
X
Move the cursor using the buttons
ú í ÍÚ
to a contact or
coil field.
X
Press
DEL
.
The contact or the coil will be deleted, together with any
connections.
Changing make contacts to break contacts
Every contact in the EZD circuit diagram can be defined as
either a make contact or a break contact.
X
Switch to Entry mode and move the cursor over the contact
name.
X
Press
ALT.
The make contact will change to a break
contact.
X
Press
OK
2
×
to confirm the change.
Figure 79: Change contact
I 03
from make to break
Creating and modifying connections
Contacts and relay coils are connected with the arrow in the
Connect mode. EZD displays the cursor in this mode as an
arrow.
X
Use
ú í ÍÚ
to move the cursor onto the contact field or
coil field from which you wish to create a connection.
I 02--u---
I 03--k
I 02--u----
i 03--k
I 02--u----
i 03--kê
ALT
OK
2 x
l
J
Do not position the cursor on the first contact field. At this
position the
ALT
button has a different function (Insert
rung).
