Control your fans from anywhere with Eaton’s
Wi-Fi Smart
Fan Speed Control (EWFFSC15)
which replaces standard
switches and features ON/OFF and DIM/BRIGHT control.
The
Wi-Fi Smart Fan Speed Control (EWFFSC15)
can be
remotely controlled using the Brightlayer Home App.
Eaton’s Wi-Fi Smart Fan Speed Control has additional
features such as a selection of 3 fan speed controls
(High, Medium, Low).
Your Wi-Fi Smart Fan Speed Control
Features
Quick Start
Guide
EATON SMART HOME
Single location installation
Operation instructions
www.eaton.com
www.eaton.com/wiringdevices
Amazon, Alexa and all related logos are trademarks of Amazon.com,
Inc. or its affiliates. Google and Google Play are trademarks of Google
LLC. Wi-Fi CERTIFIED logo is a trademark of the Wi-Fi Alliance.
Tools needed
Additional system requirements
Phillips-head
Screwdriver
Wire cutters
Prior to installation
Requires neutral for installation
WARNINGS AND CAUTIONS:
• Turn OFF circuit breaker or remove fuse(s) and test that power is
OFF before installation process
• Never wire any electrical device with power turned ON Wiring
fan speed control HOT may cause permanent
damage to fan speed control and void warranty
• If you are not sure about any part of these instructions, please
contact a licensed electrician
CAUTION
• Use only with 120V/AC 60Hz
• Do not exceed maximum rating of fan speed control as
indicated on the device
• Must be installed and used in accordance with all
national and local electrical codes
• If a bare copper or green ground connection is not
available in the wallbox, contact a licensed electrician
for installation
• Use only #14 or #12 copper wire rated for at least 75ºC with these
devices
DO NOT USE WITH ALUMINUM WIRE
IMPORTANT:
Wi-Fi Smart Fan speed control (EWFFSC15)
will
not work or will be damaged if wired incorrectly and warranty will
be voided. Refer to wiring instructions provided.
NOTE:
The
Wi-Fi Smart Fan speed control (EWFFSC15)
is
wired directly to the ceiling fan fixture.
End User license agreement
• Press ON button to turn fan ON at previously selected level
• Press the OFF button to turn the fan OFF
• The bottom LED indicates the fan speed controller
is turned ON
• When fan is OFF, press and hold the ON button for 2 seconds
until LED blinks green for full fan speed
FACTORY RESET:
The fan speed controller can be reset which will
exclude the device from its network and restore all factory defaults.
• Turn ON the fan speed controller
• Press and hold the ON button for 30 seconds until the LED indicator
blinks red
• Release the button
• LED indicator will start flashing fast while it is being reset
• The LED indicator will then start blinking magenta at a normal rate
indicating the fan speed controller is not part of a Wi-Fi network
Scan for more advanced features
including adjusting the brightness level
of the LED indicators and additional
wiring configurations
For color change kit installation
instructions, see back page
Software included with the Eaton product is hereby
licensed to you, and Eaton retains for itself (or, if applica-
ble, its suppliers) all title and ownership to any software
delivered hereunder. Without Eaton’s authorization, you shall
not copy, disclose or display the software, or otherwise make
it available to others, and shall not attempt any sale, transfer,
sublicense, reverse compilation or disassembly or redistribu-
tion of the software. By using the software, you agree to the
terms of Eaton’s End User license agreement at:
https://www.eaton.com/WiFiSmartEULA
Tools required for installation (not included) for the
Wi-Fi Smart Fan speed control (EWFFSC15)
:
A 2.4GHz Wi-Fi network with
high-speed internet
IOS 12.0 or later or Android 8.0 or later
mobile device.
Note:
Must be
connected to Wi-Fi and Bluetooth
A Brightlayer Home account set-up
through the Brightlayer Home App
Can be wired with standard 3-way switch where traveler
wire exists for 3-way.
Black Hot
Load
120V
Ground
Green
Wi-Fi Fan
Speed Control
Neutral
Neutral
Ceiling
Fan
Set up and control
in the Brightlayer
Home App
Voice control
with Alexa and
Hey Google
Easy
installation
No hub
required
Set schedules,
groups, and
scenes
EIS-0279-E (REV. D)
Smart Fan Speed Control
EWFFSC15
Fan Speed Controller Rating - EWFFSC15
Load Type
Single Gang
EWFFSC15
Ceiling fan
1.5A
Neutral is required
Single pole & 3-way
3 Preset fan speeds
High, Medium, Low
Status
indicator
Air gap
switch
ON button
OFF button
Press to
speed up
Press to
slow down
LED speed
level indicator
Status
indicator
Eaton's Wi-Fi Smart Devices
Eaton’s broad selection of
Wi-Fi Smart Devices
offer reliability with unbeatable ease of setup.
Every device sets up quickly and easily with the Brightlayer Home App–no hubs or controllers
are necessary. You can add voice-control using any Alexa or Google device.
For more information on the complete Wi-Fi smart product portfolio please visit
Eaton.com/smarthome
EWFD30
EWFSW15
EWFTRCR15
EWACD
EWFFSC15
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc.
or its affiliates. Google and Google Play are trademarks of Google LLC.
Wi-Fi CERTIFIED logo is a trademark of the Wi-Fi Alliance.
Contact us:
Eaton.com/chat
www.eaton.com/smarthome
Phone (Toll Free): 877-386-2273
Device support: Option 5 then Option 3
App support: Option 2 then Option 9
Fax (Toll Free): 800-329-3055
