Eaton easy500, easy700 Скачать руководство пользователя страница 72

Страница: 72 / 240

4 Wiring  with

4.2 Working with contacts and relays

Operating instructions

05/10 MN05013003Z-EN

www.eaton.com

4.2.1.3 Changing N/O contacts to N/C contacts

Every switch contact in the easy circuit diagram can be defined as either the
N/O contact or the N/C contact.

▶

Switch to Entry mode and move the cursor over the contact name.

▶

Press

ALT.

The N/O contact will change to a N/C contact.

▶

Press

twice to confirm the change.

Figure 39:

Changing contact

from N/O to N/C

4.2.2 Creating and modifying connections

You connect switch contacts and relay coils with the wiring arrow in Connect
mode. In this mode easy displays the cursor as an arrow.

▶

Use

ú í

ÍÚ

to move the cursor to the contact or coil field from which

you wish to create a connection.

▶

Press

ALT

to switch to Connect mode.

▶

Use

ú í

to move the diagonal arrow between the contact fields and coil

fields and

ÍÚ

to move between circuit connections.

▶

Press

ALT

to leave Connect mode.

easy will leave the mode automatically when you move the diagonal arrow
onto a contact field or coil field which has already been assigned.

Never work backwards, (

￫

section “6.1.1.2 Example: Do not wire

backwards”, page 188).

When wiring more than three contacts in series, use an M or N marker.

------

kê

￫

Do not position the cursor on the first contact field. At this
position the

ALT

button has a different function (Insert rung).

￫

In a rung, easy automatically connects switch contacts and the
connection to the relay coil if there are no empty fields in-
between.

I1-Q4-

-----

I2-I4-

I1-Q4-

I2-I4-M1-

Содержание easy500, easy700

















































































































































































































































Результаты поиска

Содержание easy500, easy700

Отзывы:

Eaton easy500, easy700, Руководство по эксплуатации, Страница: 72 / 240

Результаты поиска

Содержание easy500, easy700

Отзывы: