Eaton EASY222-DN, Руководство пользователя

Страница: 158 / 284

easy800/MFD control
commands
154
09/10 MN05013007Z-EN
Read/write image data
Overview
h Please also observe the relevant description of possible
image data provided in the easy800 manual
(MN04902001Z-EN, previous description
AWB2528-1508GB) or in the easySoft Help.
The information provided in Section “General information
on working with image data” on page 61 also applies to
easy700.
Operands Meaning Read/Write Comm
and
(hex) Page
IA1 – IA4 „Local analog inputs: IA1 – IA4“ Reading 02 155
ID1 – ID16 „Local diagnostics: ID1 – ID16“ Reading 03 157
IW0 „Read local inputs: IW0“ Reading 01 159
IW1 – IW8 „Inputs of the network station: IW1 – IW8“ Reading 01 161
M... „Marker: M..“ Read/Write 0B – 0E 162
P1 – P4 „Local P buttons: P1 – P4“ Reading 06 165
QA1 „Local analog output: QA1“ Read/Write 05 167
QW0,
QW1 – QW8 „Local outputs: QW0/ outputs of the network
station: QW1 – QW8“ Read/Write 04 168
R1 – R16
S1 – S8 „Inputs/outputs of easyLink: RW/SW“ Reading 07/09 170
RN1 – RN32
SN1 – SN32 „Receive data network: RN1 – RN32/ Send
data network: SN1 – SN32“ Reading 08/0A 172