DOCUMENT 1136
REV. G
Instruction Manual
Pro APF Series LED
ICAO TCL, IHP, & STP
16
Fault conditions include:
•
Disconnected or ‘Open’ LED module
o
Replace cable if damaged or ‘open’.
•
Incorrect jumper setting or missing jumpers
o
See Table 1 for proper jumper setting.
•
More than 25% of the driven LED ‘Shorted’
o
Replace LED module per section 9.2.
Figure 3: Power Supply Status LED Location
If the status LED is not visible or not lit, replace the power supply per section 9.7 or contact Crouse-Hinds
Airport Lighting Products for assistance. Refer to section 10 to determine the appropriate replacement kit
for your light unit.
