Eaton CMD(24VDC), Руководство пользователя

Страница: 39 / 45

3 Installation
3.3 Wiring
CMD(24VDC), CMDTD 08/23 MN121001ZU-DE/EN Eaton.com
33
3.3 Wiring
The following cables can be used for wiring at the terminals at the CMD
contactor monitoring device.
Table 4: Conductor cross-sections
IP2X
a
F 6 mm
A size Z2 Phillips screwdriver or standard screwdriver size 0.8 x 4 to 5.5 are
recommended tools for wiring the terminals on the CMD relay.
mm
2
mm
2
AWG Nm lb-in
1 x (0.5 - 2.5) 1 x (0.5 - 2.5) 20 - 14 0.8 - 1.2 7.0 - 10.6
2 x (0.5 - 1.5) 2 x (0.5 - 1.5) – 0.8 - 1.2 –
￫
The same cable cross-section must be used when wiring two
cables in one terminal.
a
a
