0359-CPR-00419
2. Connection details
1a. Mounting base (IP21C)
1b. Mounting base (IP66C)
Table 1. Specification
Technical data
Effective September 2014
FXN009SB/EF009SB
FXN009SBWP/EF009SBWP
FXN009/EF009
FXN009WP/EF009WP
Wall sounder/beacon
Wall sounder
Supply voltage (BiWire alarm) 25.5~35 Vdc
Supply voltage
(BiWire standby)
18~25.5 Vdc
Supply voltage
(conventional)
18~35 Vdc
Cable size/type
0.5~2.5mm/FIRETUF, FP200
or
MICC
Standby current
(BiWire mode)
<15μA
Current (high volume)
Sdr only = 4.7mA, AV = 11mA
Current (low volume)
Sdr only = 2.6mA, AV = 8.7mA
Sound output (high volume) 99 +/- 3dB(A) : All tones
Sound output (low volume) 89 +/- 3dB(A) : All tones
Operating temperature
-25 to +70ºC (93% ± 3%RH)
Material
ABS FR plastic
Environmental category
Type A= IP21C/ Type B= IP66
Tones
3, See section 3
Flash rate
0.5Hz (
N/A to FXN009(WP), EF009(WP)
)
Flash on period
60ms (
N/A to FXN009(WP), EF009(WP)
)
Feature
Value
Feature
Value
BiWire Ultra range:
Wall sounder/beacon IP66
Wall sounder IP66
50
50
60
(i) Drill required holes for
cable gland fixing.
(iii) Fix to mounting surface
using two suitable screws.
(ii) Drill out the required
fixing holes.
Drill position for rear
cable entry
Drill position for
glands
50 (IP33)
50 (IP33)
75 (IP66)
97 (IP66)
62 (IP33)
(i) Drill required holes for cable gland fixing (top or bottom)
and ensure cables are correctly sealed for IP66 integrity.
(ii) Fix to mounting surface using four suitable screws.
Drill position
for glands
Use these four holes
to ensure IP66 integrity
1
2
3
4
5
1
On
Off
3. Switch position meaning
1, Sounder on/off (AV version only)
2, Volume high (Off)/low (On)
3, Tones
4, Tones
5, Mode: On = BiWire, Off = Conventional
Continuous: 3=On, 4=On (984Hz)
Bell: 3=On, 4=Off (1440Hz)
Alternating: 3=Off, 4=On (644/984Hz)
{
OUT
IN
SCREEN
ZONE OUT
ZONE IN
+VE -VE
+VE -VE
ZONE IN
ZONE OUT
Screen must be continuous along entire length of loop.
Compliance EN54-3; EN54-23:2010
14
(Conventional compatible)
25-12766-E
2
Note
All products meet minimum requirements of IP33C in
accordance with EN54-3.
