Maintenance
Copyright © 2007-2010 Eaton Corporation. All Rights Reserved.
IPN 997-00012-52D July 2010
65
Step 4 - Service or replace faulty cell/monobloc (if required)
1
If the alarm is still present then follow the battery manufacturer’s instructions on
servicing or replacing the faulty cell/monobloc.
2
After the faulty cell/monobloc has been serviced or replaced clear the alarm (see
Step 3).
Procedure complete
Battery Disposal and Recycling
Follow Environmental Protection Agency (EPA) guidelines or the equivalent local regulations
to dispose of all batteries. Please remember that the owner is responsible and liable to ensure
those EPA guidelines or equivalent local regulations are followed.
For assistance contact your local hazardous waste center or Worldwide Support on page
.
