Eaton 9PXM8S4K, Руководство пользователя

Страница: 90 / 120

78 4–20kVA Users Guide P-164000669 4–20kVA Users Guide P-164000669—Rev 10
IInn//O Ouutt S Seettttiinnggss
The In/Out Settings menus allows control of input and output limits.
Figure 64. In/Out Settings Menu
Local Settings
In/Out settings
On/Off settings
Battery settings
Input signals
Comm settings
User password enable
User password settings
Settings
Output voltage
High Efficiency mode
Protected Bypass
Overload prealarm
Redundancy
Byp freq limit
Byp volt min limit
Byp volt max limit
In/out settings
Output voltage
110 V
√
120 V
127 V
High Efficiency mode
Disabled
√
Enabled
Protected Bypass
Enabled
√
Disabled
Overload prealarm
100
Byp freq limit
Byp volt min limit
Byp volt max limit
Redundancy
Level 0
%
Level 3
Level 4
4
Hz
12
%
12
%
[110V] [120V][127V]
Default:[120V][127V]
[Enabled] [Disabled]
Power the output from
Default: Disabled
[Enabled] [Disabled]
Default: Enabled
[10%] … [102%]
Load % when overload
alarm occurs
Default: 100%
Set redunancy level
Default: 0
Default disables
transfer to Bypass if the
measured bypass
frequency is below
the nominal 4%
Default disables
transfer to Bypass if the
measured bypass voltage
level is below the nominal
output voltage minus 12%
Default disables
transfer to Bypass if the
measured bypass voltage
level is above the nominal
output voltage plus 12%
Level 1
Level 2
Display Menu Screens