Eaton 9E1000IR, Руководство для продвинутых пользователей

Страница: 14 / 30

DPD-9E2305 11
①
Operation
status
Description Action
BACKUP END MODE
The UPS is in Battery mode and the
battery is running low.
This "Battery Low" warning is approximate, and the
actual time to shutdown may vary significantly
depending on the UPS load.
HIGH EFFIC. MODE
The UPS is operating in High Efficiency
mode.
The UPS is powering and protecting the equipment.
FORCED BP MODE
An overload or a fault has occurred, or a
command has been received, and the
UPS is operating in Bypass mode.
Equipment is powered but not protected by the UPS.
FREQ CONV MODE
The UPS is operating in Frequency
Converter Mode. The UPS is powering and protecting the equipment.
And output frequency is fixed.
EMERGENCY OFF
The UPS is switched off, the remote
power off command is active. To restart the UPS the RPO command needs to be
deactivated.
other (faults or
alarms) The UPS is operating with faults or
alarms. Please check troubleshooting. Some faults and alarms
show string, but other faults only show code.
5.3 Display functions
Press the Enter (
⮠
) button to activate the menu options. Use the two middle buttons (
⯅
and
⯆
) to scroll through the
menu structure. Press the Enter (
⮠
) button to select an option. Press the ( ESC ) button to cancel or return to the previous
menu.
Menu map for display functions
The following table describes the
②
Load/equipment status information provided by the UPS :
②
Load/equipment
status
middle buttons (
⯅
and
⯆
) Description
LOAD:xxx% xxxxW
(default screen ) Load
percentage and Watt
The LOAD data screen specifies the amount of power that the
connected equipment is currently using in terms of percentage
and Watt.
LOAD:xxx % xxxxVA Load percentage and VA
The OUTPUT LOAD LEVEL screen indicates the load percentage
and VA output load level.
LOAD PF:x.xx Output load power factor
The OUTPUT LOAD POWER FACTOR screen indicates the power
factor of connected equipment.
IN:xxxV xx.xHZ Input voltage and frequency
The INTPUT VOLTAGE & FREQUENCY screen displays current
data.
OUT:xxxV xx.xHZ
Output voltage and
frequency The OUTPUT VOLTAGE & FREQUENCY screen displays current
data.