Eaton 93PM-L 60-1, Инструкция по установке и эксплуатации, Страница: 135 / 164

Eaton 93PM-L 20 – 60 kW (208V) UPS Installation and Operation Manual P-164000711—Rev 03 123
Figure 71. Sign In Keypad
66..22..88 S Syysstteem m C Coonnttrroollss
Tap the CONTROLS tab on the main menu navigation bar to display the Controls screen. Double conversion
operation, transfer to bypass, shutdown, and charger control commands are controlled through this screen. In
addition, the screen displays the current status of the UPS.
Table 32 describes the control functions and provides instructions to access and use the command menu
screens.
Table 33 lists the typical System Status Screen Messages that are displayed during UPS operation.
Figure 72 through Figure 76 show the major control screens.
Table 32. Controls Menu Operation
Function Subfunction
Operation
System
Controls The CONTROLS tab on the main menu navigation bar displays the
System Controls screen.
System Status GO ONLINE starts the UPS in Double Conversion mode or transfers the
UPS to Double Conversion mode from Bypass mode.
Bypass GO TO BYPASS starts the UPS in Bypass mode or transfers the UPS
to Bypass mode from Double Conversion mode.
Charger TURN ON CHARGER/TURN OFF CHARGER sets the battery charger
on or off.
Battery Test RUN BATTERY TEST starts the battery test.
UPS Operating Instructions