manualshive.com logo in svg

Eaton 93E 30IAC-D, Инструкция по установке и эксплуатации

Поделиться
Скачать
Eaton 93E 30IAC-D Скачать руководство пользователя страница 15

Introduction

Eaton 93E Integrated Accessory Cabinet-Distribution (30IAC-D and 60IAC-D) Installation and Operation Manual P-164000072—Rev 2

 www.eaton.com/powerquality

1-5

1.7

For More Information

Refer to the 

Eaton 93E UPS (20–30 kVA, 208/220V) Installation and Operation Manual 

or 

Eaton 93E UPS (40–60 kVA, 208/220V) Installation and Operation Manual

 for the following additional 

information:

l

UPS, optional components, and accessory installation instructions, including site preparation, planning for 
installation, wiring and safety information, and detailed illustrations of cabinets and optional accessories with 
dimensional and connection point drawings

l

UPS operation, including UPS controls, functions of the UPS, standard features and optional accessories, 
procedures for starting and stopping the UPS, and information about maintenance and responding to 
system events

l

Communication capabilities of the UPS system

Refer to the 

Eaton 93E Integrated Accessory Cabinet-Tie and Bypass Installation and Operation Manual

 for the 

following additional information:

l

Installation instructions, including site preparation, planning for installation, wiring and safety information, 
and detailed illustrations of cabinets with dimensional and connection point drawings

l

Operation, including breakers, standard features and optional accessories, procedures for using the tie and 
bypass functions, and information about maintenance

Visit www.eaton.com/powerquality or contact an Eaton service representative for information on how to obtain 
copies of these manuals.

1.8

Getting Help

If help is needed with any of the following:

l

Scheduling initial startup

l

Regional locations and telephone numbers

l

A technical question about any of the information in this manual

l

A question this manual does not answer

Please call the Customer Reliability Center at:

United States:

1-800-843-9433

Canada:

1-800-461-9166 ext 260 

All other countries:

Call your local service representative

Please use the following e-mail address for manual comments, suggestions, or to report an error in this manual:

[email protected]

Содержание 93E 30IAC-D













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды