Eaton 9395C-1000/1000, Инструкция по установке и эксплуатации

Страница: 13 / 156

Eaton
®
Power Xpert
®
9395C UPS Installation and Operation Manual P-164000821—Rev 01 www.eaton.com/powerquality 1-1
Chapter 1 Introduction
The Eaton
®
Power Xpert
®
9395C uninterruptible power supply (UPS) is a true online, continuous-duty,
transformerless, double-conversion, solid-state, three-phase system, providing conditioned and uninterruptible
AC power to protect the customer's load from power failures.
The Power Xpert 9395C contains a section configured as an integrated system bypass module (ISBM) rated for
a maximum of 1100 kVA.
The Eaton 9395C online power protection system is used to prevent loss of valuable electronic information,
minimize equipment downtime, and minimize the adverse effect on production equipment due to unexpected
power problems.
The Eaton 9395C UPS continually monitors incoming electrical power and removes the surges, spikes, sags,
and other irregularities that are inherent in commercial utility power. Working with a building's electrical
system, the UPS system supplies clean, consistent power that sensitive electronic equipment requires for
reliable operation. During brownouts, blackouts, and other power interruptions, batteries provide emergency
power to safeguard operation.
The UPS is housed in a free-standing cabinet, divided into two sections to facilitate shipping:
l
Integrated System Bypass Module (ISBM)
l
Power Module (PM)
The sections match in style and color and have safety shields behind the door and front panels for hazardous
voltage protection.
The Eaton 9395C UPS configuration is shown in Figure 1-1.
NOTE Startup and operational checks must be performed by an authorized Eaton
Customer Service Engineer, or the warranty terms specified on page W-1 become
void. This service is offered as part of the sales contract for the UPS system.
Contact an Eaton service representative in advance (usually a two-week notice is
required) to reserve a preferred startup date