易仕韦尔
EASYWELL
第
3
页
Working environment
T: 1-40℃ H:
≦
85%RH
Water pressure and water
temperature
Water pressure: 0.1-0.4MPa
Water temperature:1-35℃
Suitable water type
Clean water, Soft tap water
Devices equipped with
Microcomputer, water shortage protector, float
water level controller, water inlet filter
3. Filter installation and cleaning
In order to protect the operation of the water inlet system of the equipment more
effectively and prevent the entry of impurities to affect the atomization system,
please install the water filter and ensure that every interface with no waster
leakage and air leakage.
Clean the filter element: according to the local actual water conditions, generally
1-2 months or so to clean the filter element impurities or replacement. Turn on the
water filter bottle , take out the filter element and wash it, then put it back to the
filter cover, if the filter element with too much impurities and dirty matter, please
replace it with new one.
(Remark: there is seal ring under the filter bottle, please ensure it is in the original
position.)
The operation method of control panel please see the controller operation
instruction sheet.
4.
Installation instruction
Use the water pipe to connect the water supply inlet and the tap water source, then
connect the electricity. Press the power on button, then the machine will work
automatically, after a few seconds the machine will start to atomize automatically.
When install the pipe, the pipe line must be arranged reasonably, the interface
must be sealed to prevent leakage of gas or water, please also make the pipe line
