E8 D1 Manual
1 of 9
D1 Swing Gate Control Board Manual
Imported by www.gateopener.co.nz PO Box 9215 Tauranga New Zealand
Warning: Insure you have sealed all means of
entry to the control box by insects and water.
Control Panel
– Model D1
The Easysystems D1 control panel is specially design to match 12Vdc Arm
Gate Motor(s).
The electronic panel requires no maintenance as long as the gate operates in
proper order and is kept dry and insect free. Mount the Control box as close to
the motor(s) (maximum 10m cable) as possible connected with minimum
1.5mm 2-core electrical cable to reduce any voltage drop which will affect the
performance of the system. 2.5mm to 4mm house cable is commonly used.
1. Make sure all wiring works are correct and in good condition before
supplying the mains power to the control panel.
2. Turn
OFF
the power when doing any maintenance.
3. Ensure the control panel box free from water leakage to avoid short
circuiting.
4. Do not supply mains power directly to the motor.
