USB2-H-6004 – Quick Start Guide
© 2009 EasySync Ltd.
Clearance Number : ES #25
Document Reference Number: ES_000032
USB2-H-6004_Quick_Start_Guide (ES_000032) Version 1.0
Congratulations on your purchase of the EasySync USB2-H-6004 High Speed
USB to quad port RS422 adapter. Getting started is quick and easy:
Detailed device driver installation instructions, port information and
mechanical details are available in the USB2-H-6004 datasheet. This can be
downloaded from:
www.easysync.co.uk
, or
www.easysync-ltd.com
.
•
To begin, connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-H-6004. Power is supplied by the USB
interface, so no external power supply is required.
•
Device drivers are needed for the PC to communicate with the USB2-
H-6004. If your computer is connected to the Internet, you can use
the Microsoft Windows Update service to automatically download
the latest WHQL-certified device drivers. Alternatively these can be
downloaded from:
www.easysync.co.uk
, or
www.easysync-ltd.com
.
To install the drivers , follow the following steps:
1.
Download and unzip the drivers to a folder.
2.
Connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-H-6004. Power is supplied by the USB
bus, so no external power supply is required.
3.
The Windows “Found New Hardware Wizard” will appear. Select
the choice to install the drivers from a specific location, then
browse to the folder just created when the drivers were
downloaded from the EasySync website.
4.
If a notice appears indicating that the drivers are not signed,
select “Install Anyway”.
