background image

EX4500 & EX6100

Reliability You Can Count On!

© 2010 EasyPro, Inc

Pg. 1

Installation and Service Manual

WARNING: Please read completely before you install or operate your new pump! This is an external “out-of-pond” pump!

It is NOT submersible! Do NOT allow this pump to become submerged! Never run dry! Max. case pressure.- 65 PSI!

Please fi ll in for future reference: 
MODEL: _____________________________
SERIAL NUMBER: ____________________
DATE PURCHASED: __________________
* Please fi ll out the warranty registration 
card in this manual.

S/N: XXXX-XXXXXX

EX4500

EasyPro

 TYPE: 

STRAIGHT 

CENTRIFUGAL

 

MOTOR:  NEMA C Face, 56J

HORSEPOWER:  1/8, 1/6, 1/4, 1/3 (1750 RPM) 

VOLTAGE: 115/230

 HARDWARE: STAINLESS 

STEEL 

  ACCESORIES:  90 CUBIC INCH STRAINER BASKETS (1

1

/

2

" & 2"),                  

 

  SWING Check ValveS (1

1

/

2

", 2", 3")

 

  500 CUBIC INCH STRAINER BASKETS

  

(1

1

/

2

", 2", 3")

Same label 

example for 

EX6100

 INLET: 

1

1

/

2

" FNPT

 DISCHARGE: 1

1

/

2

" FNPT                                   

 MATERIAL: 

40% 

Glass-Filled

  

Polypropylene

Содержание EX4500

Страница 1: ...ce MODEL _____________________________ SERIAL NUMBER ____________________ DATE PURCHASED __________________ Please fill out the warranty registration card in this manual S N XXXX XXXXXX EX4500 EasyPro TYPE STRAIGHT CENTRIFUGAL MOTOR NEMA C Face 56J HORSEPOWER 1 8 1 6 1 4 1 3 1750 RPM VOLTAGE 115 230 HARDWARE STAINLESS STEEL ACCESORIES 90 CUBIC INCH STRAINER BASKETS 11 2 2 SWING Check ValveS 11 2 2...

Страница 2: ...commend a flooded suction installation Please read carefully When prop erly installed the pump will provide dependable trouble free service ELECTRICAL HOOK UP 1 Check that supply voltages match the motor s requirements 2 Check motor wiring and connect according to instructions on motor to match supply voltage 3 Power cord should be protected by conduit or by cable and be of proper gauge It should ...

Страница 3: ...to bracket with seven 1 4 20 x 2 3 4 hex cap screws washers and nuts Tighten in a cross pattern 30 in lbf 10 Install drain plug with its O ring in volute drain hole 11 Before operating pump allow a proper cure time for the sealant used in step 2 DISASSEMBLY 1 Shut off power to motor before disconnecting any electrical wiring from the back of the motor 2 Disassemble volute from bracket by removing ...

Страница 4: ...nty by filling out this form and mailing to EasyPro Pond Products 18 18 Month Warranty EASYPRO LIMITED WARRANTY This product is warranted to the initial purchaser to be free of defects in materials and workmanship at the time of initial purchase and for a period of 18 months In the event this product malfunctions within 18 months from the date of purchase the sole obligation of EasyPro Incorporate...

Отзывы: