background image

Submersible Pump/Filter/UV Combo

Thank you for purchasing the EasyPro Submersible Pump/Filter/UV Combo. This 

compact all-in-one unit works efficiently to keep the water in your pond or water feature 

clear and clean. In addition to removing solids this unit provides biological filtration and 

includes a ultraviolet clarifier to kill free floating algae. The UV clarifier has its own plug to 

be used only when needed to kill floating algae. A set of nozzles is included to provide the 

option of a decorative fountain in your pond.
Please read this instruction booklet carefully before use to assure that you safely and 

correctly use this product.

ESF1250

Safety and Warnings:

1.  Be sure to read and follow all safety instructions
2.  Always disconnect the electrical supply before handling, 

maintaining, repairing or installing any pond equipment. Do not 

immerse or attempt to use a wet plug.

3. 

WARNING: Risk of electric shock. Install unit only to a 

covered Class A 115 volt GFCI protected receptacle that is 

weatherproof with the power unit connect to the receptacle. 

4.  Provide a “drip loop” with the power cords by making a “loop” of cord 

below the power receptacle. This prevents water from traveling along the cord into the receptacle.

5.  This unit has not been approved for use in swimming pools or spas.
6.  Do not use if power cord is damaged. Cord is not repairable and damaged unit should be discarded.
7.  The integrated pump must be fully submersed underwater at all times when operating. Never let the pump 

run dry, as this can damage the impeller or overheat and possibly burn out the pump.

8.  Do not use to pump oil or other non-intended liquids. 
9.  

DANGER: Do not operate the UV lamp outside the housing of the unit. UV radiation can be harmful to 

skin and eyes.

Model 

ESF1250

Pump 

650 GPH Mag Drive

Voltage 

115 Volt/60Hz

Max Flow 

650 GPH

Pond Size 

250-1250 Gallons

Wattage 

50 Watts

Power Cables 

15 feet

Fountain Nozzles 

Three-tier, two-tier, waterbell 

UV-C Lamp 

11 Watt

Ballast 

cUL listed 115V / 60Hz

Содержание ES1250

Страница 1: ...NG Risk of electric shock Install unit only to a covered Class A 115 volt GFCI protected receptacle that is weatherproof with the power unit connect to the receptacle 4 Provide a drip loop with the power cords by making a loop of cord below the power receptacle This prevents water from traveling along the cord into the receptacle 5 This unit has not been approved for use in swimming pools or spas ...

Страница 2: ... threaded cap on the UV housing to reveal inner UV assembly 6 Remove grommet from end of the lamp and set aside gently pull lamp out of the socket and discard 9 Reinsert UV assembly into plastic housing tighten cap and replace everything back into base 1 Unscrew fountain assembly then remove top cover from unit 5 To replace lamp unscrew threaded ring that holds the quartz sleeve in and remove slee...

Страница 3: ...ours to allow treatments to be most effective Fountain Assembly Maintenance Refer to previous page for UV lamp and quartz sleeve replacement Filter pads and media are wearable items that may be replaced periodically 1 Pick up unit out of water and unscrew fountain assembly Do not pick up filter by power cord 2 Remove top cover from unit and take out filter pads and media 3 Flush filter pads and me...

Страница 4: ...st be obtained by calling EasyPro Pond Products at 800 448 3873 It is your responsibility to pay the return shipping charges Be sure to include the RA number original receipt in the form of an invoice or sales receipt name return address and phone number inside of the package No warranty claims will be honored without the original receipt Ensure the product is properly packaged and insured for the...

Отзывы: