AF50 • AF100 • AF1002
Aqua Fountain
Installation Instructions
Thank you for your purchase of an EasyPro Aqua Fountain. The Aqua Fountain will enhance the beauty
of your pond or lake with reliable performance. Each EasyPro Aqua Fountain comes assembled for easy
installation.
The AF50 (1/2 hp, 115 volt) and AF100 (1 hp, 115 volt) models come with a timer and GFCI panel.
The AF1002 (1 hp, 230 volt) includes timer but not GFI (this must be purchased locally for proper
operation of this unit).
SAFETY AND HANDLING INSTRUCTIONS
• Under NO circumstances should anyone enter the water with the electrical equipment
plugged in and/or in operation.
• Exercise caution with any electrical equipment with moving parts.
• Never run the unit out of the water. This can cause damage to the unit and is dangerous for the
operator.
• Units not for use in brackish or salt water applications.
• Never lift or pull the unit by the power cord.
• Do not use waders in deep ponds/lakes or pond/lakes with drop offs, drastic slopes or soft bottom
material.
• Do not use boats that tip easily for fountain installation. Follow all boating safety rules and
regulations, including wearing a PFD (personal flotation device).
• To reduce the risk of electric shock the units should be plugged into a GFCI breaker that is properly
grounded. Be sure to test the GFCI breaker upon installation and every month thereafter to ensure
proper operation.
INSTALLATION
1
Remove unit and power cord from packaging. Inspect unit for any damages in shipping. Notify
the shipping company immediately or your EasyPro dealer about any damage. (Optional Step:
A light kit may be installed on the fountain before launching
unit in the water. Follow the installation instructions for the
EasyPro two or three light kit.
2
Choose your nozzle. To change the nozzle (umbrella or
rocket spray) simply remove the gray cover and thread
the nozzle into fountain head. Nozzle slots may vary slightly.
Rocket Nozzle
Umbrella Nozzle
