EASYPRINT Compact 32D Скачать руководство пользователя страница 34

Страница: 34 / 243

DESCRIPTION AND INSTALLATION

2-14

25364 Issue 8 March 2018

Labeller Bracket / Guide Roller (shown mounted onto the

Labeller Bracket Assembly)

Note:

Guide rollers can be assembled in either left-hand or right-hand
orientation.

Mounting the Printer in the Bracket System

Compact 32d, 32c and 53c

Notes: (1)

Tool required: 5mm Allen key

(2)

Prior to mounting the Compact 32c / 53c in the bracket system,
remove the cassette to enable easier handling.

(1) Mount the printer in the bracket system, using four M6 screws

(supplied with bracket).

(2) When mounting the printer in the CM bracket, ensure the print head is

positioned above the top point of the rubber roller.

Note:

To obtain the best print quality, fine adjustment of the print head
can be done electronically at a later stage.

See “Set Up Printer -

Final Steps (Compact 32d, 32c and 53c)” on page 2-51.

(3) In order to apply the correct print head pressure, ensure that the

height between the base of the printer and rubber roller or platen is
approximately 3mm

Note:

The precise height of the print head will need to be adjusted
electronically via the software once the services are connected.

See “Set Up Printer - Final Steps (Compact 32d, 32c and 53c)”
on page 2-51.

(4) When the correct distance is obtained, tighten the screws.

(5) Mount the power supply.

See “Connectivity - Compact 32d, 32c and

53c” on page 2-33.

Содержание Compact 32D




















































































































































































































































Результаты поиска

Содержание Compact 32D

Отзывы:

EASYPRINT Compact 32D, Руководство по эксплуатации продукта, Страница: 34 / 243

Результаты поиска

Содержание Compact 32D

Отзывы: