1
INSTRUCTIONS FOR USING YOUR EASYHALER
Easyhaler Budesonide is easy to use. Read through these
instructions first: they tell you what you should do
and what to look out for.
UNPACKING THE EASYHALER
The Easyhaler (Figure 1) comes in a laminate pouch to keep the
powder dry.
Do not open the pouch until you are ready
to start using your Easyhaler
.
A protective cover is optional.
If you do not use the protective
cover
, move on to section “Taking a dose from Easyhaler Budesonide”
(See Figures b
).
Open the protective cover and insert the Easyhaler into it (Figure 2).
Make sure the dust cap covers the mouthpiece of the Easyhaler
(this stops the Easyhaler going off by accident).
If you are not using the Easyhaler immediately, close the protective cover.
TAKING A DOSE FROM EASYHALER BUDESONIDE
If you are also using a “reliever” inhaler, use it first.
Open the protective cover, if you are using it.
Remove the dust cap
.
A. Shake
Shake the Easyhaler vigorously up and down three to five
times (Figure 3a or 3b), to allow proper
powder flow and a correct dose. After shaking,
hold the Easyhaler in the
upright
position.
B. Click
Press the Easyhaler
once
between your finger
and thumb until you hear a click (Figure 4a or 4b),
and let it click back again, to deliver powder into the
inhalation channel inside the mouthpiece. Keep holding the
Easyhaler in the upright position.
If you think that you have clicked the Easyhaler more
than once, see section NOTE! (Figure 6a or 6b).
Figure 2.
Dust cap
Protective
cover
Figure 1.
Inhaler
Mouthpiece
Dust cap
Protective
cover
Figure 1.
Inhaler
Mouthpiece
Figure 4a.
Figure 4b.
