Easy-Laser E530, Руководство пользователя

Страница: 56 / 86

52
Machine train (3)
Lock feet pair
This function is available in graph and table view. We recommend that you lock two
feet pair to get the most accurate calculated reference line as possible. If you choose to
lock only one feet pair, the tilt of the train is maintained and the coupling is offset.
Best fit and Manual fit
By default, an average best fit is calculated on the measured machine train. This means
that the train is tilted to the flattest possible plane. If no feet pairs are locked, the sys -
tem assumes that all machines are possible to move in all directions. For each coupling
that you measure, the best fit is recalculated. When you have made adjustments on a
coupling, the best fit is no longer recalculated.
Manual fit
Only available when you have measured the whole train, and only in graph view. Use
this function when you know that you for example can move a machine a little in one
direction, but not at all in another direction.
1. Select and to activate the Manual fit function. If there are locked
feet pair, these are unlocked.
2. Use the numerical buttons to move the graph.
• Buttons 1 and 4 move the left part of the train
• Buttons 2 and 5 moves the whole train.
• Buttons 3 and 6 moves the right part of the train.
• Button -+ will change the scale.
To return to average best fit, select and .
Uncertain coupling
When you adjust one coupling, it might affect the next coupling in the machine train.
In the example below, the coupling A -B has been adjusted, which might have an affect
on the coupling B - C. This is indicated with the symbol . When you remeasure or
adjust the coupling, the warning is removed.
Uncertain coupling