Easy-Laser E530, Руководство пользователя

Страница: 38 / 86

34
Horizontal
Enter distances
Confirm each distance with .
3
3
5
2
7
1
6
1. Distance between first and second feet pair. Optional, select to activate field.
2. Distance between second feet pair and S-unit. Optional, select to activate field.
3. Distance between S-unit and M-unit. Measure between the rods.
4. Distance between S-unit and centre of coupling.
5. Distance between M-unit and feet pair one.
6. Distance between feet pair one and feet pair two.
7. Coupling diameter. Optional, select to activate field.
Function buttons
Leave program.
See “Control panel” on page 14 .
See “Tolerance” on page 42 .
See “Thermal compensation” on page 40 .
Select to enter distances of the S-machine.
Toggle between showing Distance view in 3D or 2D.
Diameter . Select to enter coupling diameter. This is necessary if you want
the result based on the gap of the coupling instead of angle.
Add a feetpair.
Toggle button. Show movable machine to the left or the right.
Continue to Measure view. Available when you have entered the manda-
tory distances.