2
SPEcIFIcATIONS
STATEMENT OF LIMITED WARRANTY
The Eastwood Company (hereinafter “Eastwood”) warrants to the end user (purchaser) of all new welding and cutting equipment that it will be free of defects in workmanship
and material. This warranty is void if the equipment has been subjected to improper installation, improper care or abnormal operations.
WARRANTY PERIOD:
All warranty periods begin on the date of purchase from Eastwood. Warranty Periods are listed below, along with the products covered during those warranty periods:
3 Year Warranty on Material, Workmanship, and Defects:
• Eastwood TIG 200 DC Welder
Itemsnotcoveredunderthiswarranty:Collets,colletbodies,electrodes,nozzles,andgroundclampandcable.
All other components are covered by the warranty and will be repaired or replaced at the discretion of Eastwood.
2 Years:
• All Welding Helmets.
CONDITIONS OF WARRANTY TO OBTAIN WARRANTY COVERAGE:
Final determination of warranty on welding and cutting equipment will be made by Eastwood.
WARRANTY REPAIR:
If Eastwood confirms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option
to rectify the defect. At Eastwood’s request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood’s warranty.
FREIGHT COSTS:
The purchaser is responsible for shipment to and from Eastwood.
WARRANTY LIMITATIONS:
EASTWOOD WILL NOT ACCEPT RESPONSIBILITY OR LIABILITY FOR REPAIRS UNLESS MADE BY EASTWOOD. EASTWOOD’S LIABILITY UNDER THIS WARRANTY SHALL NOT EXCEED
THE COST OF CORRECTING THE DEFECT OF THE EASTWOOD PRODUCT. EASTWOOD WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (SUCH AS LOSS OF
BUSINESS, ETC.) CAUSED BY THE DEFECT OR THE TIME INVOLVED TO CORRECT THE DEFECT. THIS WRITTEN WARRANTY IS THE ONLY EXPRESS WARRANTY PROVIDED BY
EASTWOOD WITH RESPECT TO ITS PRODUCTS. WARRANTIES IMPLIED BY LAW SUCH AS THE WARRANTY OF MERCHANTABILITY ARE LIMITED TO THE DURATION OF THIS
LIMITED WARRANTY FOR THE EQUIPMENT INVOLVED. THIS WARRANTY GIVES THE PURCHASER SPECIFIC LEGAL RIGHTS.
THE PURCHASER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Output
Amperage
Range
10-200 A
DC
Maximum
Output No Load
Voltage
50-80 V DC
Input
Voltage
120 VAC
50-60 Hz
/220 VAC
50-60 Hz
Rated
Duty
Cycle
60%
@ 150 A
Pre
Gas
Flow
0.5 Sec
Post
Gas
Flow
5 Sec
Weight
18 Lbs.
Overall
Dimensions
16.9”
(430 mm) x
7.3”
(185 mm) x
12”
(306 mm)
TIG Welding is the most controllable, efficient and versatile method of welding many metals including steel, stainless steel and more.
Your
Eastwood TIG200 DC Welder
with High-Frequency Inverter Technology is capable of welding thin or heavy gauge steel with
precision and ease. The voltage self-sensing circuitry automatically detects a power source range of 110 to 240 volts and delivers from
10 up to 200 Amps DC. The included foot pedal provides the operator with the precise amperage control required when welding. A high
frequency start feature guarantees an instant arc strike with no tungsten contamination.
READ AND UNDERSTAND ALL INSTRUCTIONS AND PRECAUTIONS BEFORE PROCEEDING.
This unit emits a powerful high voltage and extreme heat which can cause severe burns, dismemberment, electrical shock and death.
Eastwood shall not be held liable for consequences due to deliberate or unintentional misuse of this product.
