4
"
EXTENDED-REACH
AIR CUT-OFF TOOL
INSTRUCTIONS
Part #51680
ADDITIONAL ITEMS
#28255
Eastwood 4” Metal Cut-Off Wheels, 1/16th. x 5/8 Arbor - 5 Pk.
#31524
1/4” FNPT Type M, Quick Connect Coupler
© Copyright 2019 Easthill Group, Inc. 5/19 Instruction item #51680Q Rev 3
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: [email protected]
PDF version of this manual is available at eastwood.com
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
800.343.9353 eastwood.com
PROBLEM
CAUSE
CORRECTION
Tool Doesn’t
Respond
to Trigger
Depression
Insufficient
volume of air
(CFM) to operate
tool
Verify sufficient air supply to tool. (7.1 CFM @ 90 PSI
minimum requirement.
Moisture or other
contamination in
air supply
Check for moisture in air line and tool air inlet.
Tool
Performance
is Slow or
Sluggish
Insufficient
volume of air
(CFM) to operate
tool
Verify sufficient air supply to tool. (7.1 CFM @ 90 PSI
minimum requirement.
Moisture or other
contamination in
air supply
Check for moisture in air line and tool air inlet.
Air Motor is
lacking lubrication
Stop use immediately and add air tool oil directly to
air inlet.
Tool Vibrates
Excessively
During Use
Out of balance
condition from
damaged Cutting
Wheel
Stop use immediately, check for and replace cracked
or broken Cutting Wheel.
Loose Locking
Screw
Tighten loose Locking Socket Head Cap Screw.
TROUBLESHOOTING
