Eastwood 32290, Инструкция по эксплуатации, Страница: 6 / 12

6
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
FIG. 1
CONTROLS
TRIGGER (FIG 1)
Located at the underside of the saw handle.
Pull upward with the index finger to switch
motor “ON”, release for “OFF”
TRIGGER LOCK (FIG 1)
A push-button lock button located at the right
of the saw handle just above the Trigger can
be used to lock the Trigger in the on position.
To engage; pull Trigger upward to the “ON”
position and push the Lock Button in. The
trigger may be released, and the motor will
stay “ON”. Pull Trigger again and the Trigger
Lock is released, and the motor will stop.
MOTOR SPEED CONTROL (FIG 2)
Located at the top, forward area of the
saw housing.
Controls the motor speed.
This Rotary Thumb Wheel can be set to
1, for 1000 SPM (Strokes Per Minute),
up to 6, for a maximum of 3000 SPM.
BLADE ORBITAL MOTION (FIGS 3 & 4)
Located at the lower left, forward side of the
saw housing.
Controls the “Orbital” motion of the Blade as
seen from the side view. When on, it allows
the blade to walk forward on the down-
stroke and rearward on the upstroke which
enhances the cutting action. This control
offers 4 positions; Off, Low, Medium and
High
(FIG 3)
.
When the Lever is placed in the full “Down”
Position, there is no Orbital action and the
Blade travels in a straight vertical, Up and
Down motion
(FIG 4) .
FIG. 2
FIG. 3
FIG. 4
Trigger Lock
(push in)
Trigger
(push up)
✓
✓
Motor Speed
Control
✓
Full Orbital
Medium Orbital
Low Orbital
✓
✓
✓
Orbital Motion
OFF
✓
Orbital
Blade
Motion
Orbit Off
Blade
Motion