Advanced Setup Options
5B6729 – May 1997
59
Selecting Sleep Mode Options
Description:
You can choose how the Sleep mode feature operates by selecting or not selecting the Roller Jog and
the Cool Down options and by setting the values of the On and Off Timers for the Auto Start-Up
option.
The selection of the Roller Jog feature reduces chemical buildup on the Rack and Crossover Rollers.
When the Roller Jog feature is selected, both the transport Motor and wash water activate periodically
(for 90 seconds every 30 minutes) supplying the Crossover Fill Troughs with water. Therefore, it is
recommended that you select the Roller Jog option when operating the Processor in Sleep mode.
The selection of the Cool Down feature prevents the condensation of processing solutions by leaving
the exhaust Blower on for 3 hours or until the fixer temperature goes below 27˚C (80˚F). The transport
and Recirculation Pump turn on for 90 seconds every 10 minutes during the cool down period. The
wash water turns on when the transport is on for the first time and then every fourth time thereafter.
Therefore, the Cool Down feature, like the Roller Jog feature, reduces the buildup of chemicals on the
Rack and Crossover Rollers. It is recommended that you also select the Cool Down option when
operating the Processor in Sleep mode.
Default Settings: Roller Jog - Off
Cool Down - Off
Procedure for Turning On or Off the Roller Jog Option:
[1] From the Walk-Up Menu, press the “GO TO SETUP” key.
[2] Enter the 4-digit access code.
[3] Press the “MORE” key.
[4] Press the “OPTIONS” key.
[5] Press the “MORE” key.
[6] Press the “MORE” key.
READY
STD
DRYER
TEMP
SLEEP
SELECT
CYCLE
MORE
GO TO
SETUP
1
2
3
4
CANCEL
REQUEST
▲
▼
CHEM/
CYCLE
MORE
DONE/
RETURN
INFO
SETUP
OPTIONS
DONE/
RETURN
REPLEN
MODE
DAILY
STARTUP
DISPLAY
UNITS
MORE
DONE/
RETURN
ACCESS
CODE
USER
ACCESS
TEMP
LOCK
MORE
DONE/
RETURN
