Eastey SB-2EX-Auto, Руководство пользователя

Страница: 21 / 67

Operation 21
Center Tape — Eastey-EX Tape Head only
Make sure the tape is centered
on all the rollers.
There are several rollers in the
tape cartridge where the tape
alignment should be checked to
verify the tape stays on center as
it is being dispensed.
Return the tape cartridge to the
operation position.
Main Spring Adjustment
When setting tension for the rollers, consider the amount of pressure on the box flaps
required to make the seal. Cases completely filled to the top with product may require
more pressure on top and bottom seams when applying tape than partially-filled cases,
where excessive pressure could possibly crush the case.
For sealing light weight boxes, decrease the main spring tension. For heavier boxes,
increase the main spring tension.
Both Eastey-EX and EZ-EX tapeheads have a main spring, which may require tension
adjustment for the particular application for which you will be using the case taper.
For quick reference and convenience, basic information for adjusting main spring
tension for the Eastey-EX Tape Head and EZ-EX Tape Head is provided on the
following page. For more information about setting the tape head tension, refer to the
User Guide provided with the tape heads that are being used in the case taper.