Eastey SB-2EX-Auto, Руководство пользователя

Страница: 14 / 67

14 Installation
Installation
Carefully remove the outer protective outer shipping materials. Avoid damaging the
machine body.
Remove the shipping bolts that secure the case taper to the shipping pallet. Lift the
case taper off the pallet.
CAUTION! The SB-2/3EX-Automatic Case Taper is very heavy and will
require a forklift, floor crane, or several people to move
safely off the shipping pallet. Use proper equipment when
lifting the case taper and ensure the case taper is secure and
will not shift while being moved or during height adjustment
or installation of locking casters.
Four locking casters are provided and optionally may be installed onto the four
adjustable support legs. To install casters, thread one caster into the bottom of each leg.
CAUTION! Raise the case taper off the floor to install the casters. Use
proper equipment when lifting the case taper. Ensure the
case taper is secure and will not shift while installing the
casters or adjusting the height.
To adjust the leg height, loosen the screws on each leg and slide the insert up or down
as required and then retighten the screws at the required height. When the case taper
has been moved to its suitable location, use the caster brake to secure the case taper
from rolling.
Leg
Caster
Thread
caster
into
bottom of
support
leg insert.
Caster
Brake
Adjust
foot up or
down as
required
to raise or
lower
case
taper.
To adjust
height,
temporarily
loosen
adjustment
screws, move
leg insert up
or down, and
then
retighten.