Eastey Perfomance EN Series, Руководство пользователя

Страница: 9 / 40

Introduction 9
Specifications
Model
Number
Seal Dimensions Machine Dimensions Standard Power Net Shipping
Front
(F)
Side
(S)
Width
(A)
Height
(B)
Length
(C)
Volts Amps Phase Weight Weight
EM1622T
22 in.
56 cm
16 in.
41 cm
27 in.
69 cm
50 in.
127 cm
63 in.
160 cm
220/110 15/20 1
400 lbs.
181 kg.
500 lbs.
227 kg
EM1636T
36 in.
91 cm
16 in.
41 cm
27 in.
69 cm
50 in.
127 cm
91 in.
231 cm
220 20 1
500 lbs.
227 kg
600 lbs.
272 kg
EM1622TK
22 in.
56 cm
16 in.
41 cm
27 in.
69 cm
50 in.
127 cm
63 in.
160 cm
220/110 10/20 1
400 lbs.
181 kg
500 lbs.
227 kg
EM1636TK
36 in.
91 cm
16 in.
41 cm
27 in.
69 cm
50 in.
127 cm
91 in.
231 cm
220/110 10/20 1
500 lbs.
227 kg
600 lbs.
272 kg
Explanation of Model Numbers
•
E = Manufactured by Eastey Enterprises Inc., division of Engage Technologies.
•
M = Manual (Semi-Automated) L-sealer operation. EM model Performance
Series L-sealers incorporate an electromagnetic hold-down system that allows
the operator to load the next package while the preceding package is being
sealed, assuring uniform sealing pressure over the entire length of the seal bars
to provide consistent sealing results.
•
_ _ = 16 — First two digits indicate length of sidebar or nominal maximum length
of side seal in inches: 16 inches.
•
_ _ = 22 or 36 — Remaining two digits indicate length of front bar or nominal
maximum length of front seal in inches: either 22 or 36 inches.
•
T = Takeaway conveyor — Performance Series L-Sealers are typically equipped
with a takeaway conveyor.
M = Manual takeaway is an option.
•
K = Knife — Indicates hot knife seal bar. For smaller units, where (K) is indicated
in parentheses, the hot knife seal bar is an option and the unit can be ordered
with or without it. For larger units, the hot knife seal bar is standard.
•
V _ = Voltage and Phase. V0 = 110V AC single phase; V1 = 220V AC single
phase. All models are available configured for V1 = 220 VAC single phase.
Models EM1622T, EM1622TK, or EM1636TK are also available configured for
V0 = 110 VAC single phase. See the following table for available AC voltages.
Only single phase is offered.
Voltage and Phase Designator Meaning (For Amperages, see Specifications table.)
Voltage / Phase
Designator
Volts Phase
Voltage / Phase
Designator
Volts Phase
V0 110 1 V1 220 1