background image

12   Installation 

Unpacking 

 

Thoroughly inspect the equipment and packaging immediately on arrival. 
 
Carefully remove the outer protective shipping wrapper. Inspect the machine for any 
damage that may have occurred during transit. If goods are received short or in 
damaged condition, it is important that you notify the carrier’s driver  before they leave 
your company and insist on a notation of the loss or damage across the bill of lading. 
Otherwise no claim can be enforced against the transportation company. Please note 
that a copy of this document is attached to the outside of every crate. 
 
If concealed loss or damage is discovered,  notify your carrier at once and request, 

insist

, on an inspection. This is absolutely necessary. A concealed damage report must 

be made within ten (10) days of delivery of shipment. 
 
Unless you do this, the carrier will not entertain any claim for loss or damage. The agent 
will make an inspection and grant a concealed damage notation. If you give the 
transportation company a clear receipt for the goods that have been damaged or lost in 
transit, you do so at your own risk and expense. 
 
All claims must be filled within 

five

 (

5

) months of the delivery date or the carrier will not 

accept them. 
 
We are willing to assist you in every reasonable manner to help you collect claims for 
loss or damage. However, this willingness on Eastey’s part does not make Eastey or its 
parent or related companies responsible for collections or claims or replacement of 
equipment damaged or lost in transit. 

 
 

Loading and Unloading Instructions 

 

  Air-Ride suspension and shipping straps are required for transportation of sealers. 

 

  When transporting the sealer, roll the machine into the truck or trailer, and then 

when the machine is in position for shipping, lock the locking casters. 

 

  Use shipping straps to restrain the sealer securely so it will not shift in transit. 

 

Содержание Perfomance EN Series









































Отзывы: