Eastey EXS-100, Руководство пользователя

Страница: 20 / 53

20 Operation
5. Feed the end of the strap into the strap slot between the stop angle brackets, and
the sealing mechanism inside will pull the strap tight and weld and cut the ends
of the strap.
Note: A minimal amount of smoke may be emitted from the heating
element and strap ends as they are being welded together.
Be sure you have adequate ventilation while operating the
machine and avoid inhaling smoke.
After Operating the Strapping Machine

Remove any excess dust or dirt from the machine.

Shut off machine main power when the machine is not in use.