Thermo sensor
Model: TTX201
Instruction Manual
Congratulations on your purchasing of our new outdoor thermo senor
which can cover up to 50m range in an open area. This sensor is
designed for everyday use for the home or office and used to monitor
the temperature change of outdoor sites.
Description of buttons
The remote sensor has 2 function buttons inside the battery compartment
1.
[CH] button
After the battery installation, the LED blinks slowly every 1.5 seconds and channel
number shows ‘1’ to indicate it is now under channel setting mode and is set to
channel 1 by default. If the user presses no key within ten seconds, the unit will
auto-exit the channel setting.
If the user press [CH] button once during the channel setting, the channel number
is changed to ‘2’ to indicate the unit is set to channel 2. If the user press [CH]
button again, the channel number will be advanced to channel ‘3’ and so on.
The maximum channel number is ‘5’ and the unit w ill be scrolled back to channel
‘1’ at the 5
th
press of the [CH] button.
2.
[ RESET ] Button
Press to hardware reset the unit to factory setting
LED indicator
