Vantage 4000
SCOPE
This manual contains information concerning the installation, operation and
maintenance of the Vantage 4000. To ensure proper performance of the unit, the
instructions should be thoroughly understood and followed.
Keep the manual in a readily accessible location for future reference.
Changes and additions to the original edition of this manual will be covered by a “CHANGE
NOTICE” supplied with the manual. The change notice will identify the sections in this manual
where the changes have occurred.
Vantage 4000
Table of Contents
Scope............................................................................................................................ 1-1
General Specifications ................................................................................................... 1-2
Installation Procedure
................................................................................................. 2-1
Enclosure Mounting....................................................................................................... 2-1
System Diagram............................................................................................................ 2-2
Wiring Connections ....................................................................................................... 2-3
Splice Procedure............................................................................................................ 2-5
Programming
............................................................................................................... 3-1
QuikCal Menu Functions ............................................................................................... 3-1
Main Flow Screen
..................................................................................................... 3-2
Review Meter
............................................................................................................ 3-2
Program
.................................................................................................................... 3-2
Measure Units ......................................................................................................... 3-2
Sensor Install........................................................................................................... 3-3
Totalizer ................................................................................................................. 3-5
4-20 Output ............................................................................................................. 3-6
Damping................................................................................................................. 3-6
Lost Signal.............................................................................................................. 3-7
Flow Simulation ...................................................................................................... 3-7
Integrator ................................................................................................................ 3-7
Setpoints ................................................................................................................. 3-8
Relays..................................................................................................................... 3-8
Daily Sum
................................................................................................................. 3-8
Data Logger
.............................................................................................................. 3-9
System Setup
............................................................................................................. 3-9
Section
1
1-1
942000
12/02
