Gordon Round Night Stand End Table
- 2 -
IMPORTANT NOTE:
-
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
-
Remove all wrapping material, including staples & packing straps before you start to assemble.
-
DO NOT tighten all screws and bolts until completely assembled.
-
Keep all hardware parts out of reach of children.
PART LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts:
HARDWARE LIST
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Bolt Screw
(M6x40mm)
4
2
Allen key
1
STEP 1
Slowly pull out Drawer of Chest (A) halfway, push down inside plastic and then pull Drawer out as shown below.
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
A
Chest
1
B
Leg
4
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED
